Skip to Content

Why Your Toro Mower Blades Won’t Engage or Turn On

When mower blades won’t turn on and rotate under the mower deck, you’ll need to look at electrical problems and worn deck components.

Toro lawn mower blades won’t engage or turn on due to a worn or stretched mower deck belt; a belt that has come off the pulleys; a bad PTO switch; a faulty clutch; a weak battery; a bad safety switch or a blown fuse.

Working around the mower deck is very dangerous. Remove the ignition key and spark plug wires before working on your Toro. Wait for all parts to come to a stop.

Toro mower blades won't engage or turn on

This post may include affiliate links. Purchases made through these links may provide a commission for us, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

Follow all safety instructions provided in your equipment operator’s manual prior to diagnosing, repairing, or operating. Consult a professional if you don’t have the skills, or knowledge or are not in the condition to perform the repair safely.

Toro Mower Blades Won’t Turn On or Engage

Worn Deck Belt on a Toro Mower

Check the condition of the mower belt. The belt is responsible for gripping the deck pulleys to turn the mower blades. When the Toro deck belt is worn, the belt may slip on the pulleys and the blades won’t turn.

A worn or bad Toro deck belt is one that has cracks, wear, fraying, or a shiny glazed appearance. A worn deck belt may also sit deep in the pulley grooves.

Replace a worn Toro belt. Even if the blades do rotate, they may spin at reduced speeds. This will affect the cut quality.

A fast blade speed is required to create suction under the deck to lift the grass and give it a nice even cut.

Belt Came Off the Pulleys on a Toro Mower Deck

If you find the belt has fallen off the pulleys and will no longer turn the mower blades, you’ll need to look at the condition of the belt and items that can cause the belt to fall off like a bad pulley, worn tensioner arm, or missing spring.

You can find a list of items that will cause the Toro belt to keep falling off the mower deck here.

Worn Idler Tensioner Arm & Spring on a Toro Mower

A tensioner arm and spring are used to hold the idler pulleys inline. You will most like find a pulley on one side of the bracket and a spring on the other side.

These pieces can wear over time causing the belt to vibrate off the pulleys. The spring can break or stretch. The hole in the bracket can also wear causing affecting the tensioner.

Worn Bearing in a Toro Pulley

You will find bearings in the pulleys on the mower deck. The pulley can wear over time. This may cause the pulley to no longer sit securely parallel to the mower deck.

Instead, a bad bearing may cause the pulley to wobble. The belt can roll off of a pulley when there is a rocking movement to the pulley.

To find a bad pulley, slowly rotate the pulley by hand and feel for resistance or listen for a bearing noise indicating the pulley is going bad. Grab each side of the pulley and see if there is extra play allowing the pulley to rock back and forth.

A good pulley will sit securely on the deck. Replace a pulley assembly where the bearing is found to be bad.

Faulty PTO Switch on a Toro Mower (Electric Clutch)

The PTO switch is usually a knob installed on your Toro mower that allows voltage from the battery to power the clutch. When the switch fails, the blades won’t turn on.

Check for continuity in the switch. Replace a switch with a break in continuity.

Bad Clutch on a Toro Mower

The PTO (Power Take Off) clutch transfers power from the engine to the blades by engaging the drive belt. A clutch that is worn or faulty must be replaced when it fails to power the blades.

For more details on clutches, check out A Look into How Lawn Mower Clutches Work.

Worn Clutch Cable on a Toro (Manual Clutch)

You will find a clutch lever and cable on a Toro mower with a manual engagement clutch.

Check the condition of the clutch lever, cable, spring, bushings, and linkages to make sure the clutch is being engaged and the parts are not worn

Replace any worn parts.

Weak Battery on a Toro Mower

An electric clutch uses power from the battery. When the battery is weak, it is unable to provide sufficient power to the clutch solenoid to engage the mower blades.

Check the voltage of the battery using a multimeter. A fully charged 12-volt battery should give you a reading of about 12.7 volts.

Charge the battery when you get a reading less than this. If your battery continues to die you can find common things that are causing this in 5 Things That Are Draining the Life of Your Lawn Mower Battery.

Charge a Toro Battery: Use a battery charger to charge a battery. Before you continue, wear protective gear to protect your skin from electrical shock and protect your eyes. Follow these steps to charge your riding mower or zero-turn battery with a charger:

  • Access the battery and terminals. You may need to use a screwdriver to uncover the battery. You will find the battery under the hood or under the seat. Do not remove the battery from the casing.
  • Connect the battery charger cables beginning with the positive cable first. This is the red cable or the one with the plus sign. Place the cable on the positive battery terminal.
  • Attach the negative cable to the negative battery terminal. This is the black cable or the one with the negative sign.
  • Do not touch anything that doesn’t have a rubber coating to prevent electrocution.
  • Set the charger’s voltage and amperage level to the desired level. The average volt level for lawn mower batteries is usually 12 volts. More amperage charges the battery faster. Start with two amps and work up to no more than 10 amps. A slow charge is best.

If you find the battery won’t hold a charge, you must replace it with a new one. You can find 12-volt lawn mower batteries at your local hardware or automotive store. You may also find batteries at your local lawn mower dealership.

Bring the old battery with you. Most places will charge you a core fee unless you provide them with your old battery. Core fees average $20.

Bad Safety Switch on a Toro Mower

The deck will not engage when the operator is not in the seat. This is part of Toro’s safety system to keep the user safe.

If you have the mower deck engaged and you lift yourself out of the seat, the deck will turn off and the blades will stop spinning.

If the seat switch fails to work, it may not properly sense the operator. The safety system will prevent the blades from engaging when there is a bad seat switch.

Test the seat switch using a multimeter or you can temporarily bypass the safety switch to identify a bad switch. Do not operate a mower without the safety switch installed for your safety

Always have safety switches installed and working on your equipment.

Blown Fuse on a Toro Mower

When you aren’t getting power from the battery to the clutch, you may have blown a fuse. The fuse is used to protect the Toro electrical system.

Replace a blown fuse with the same size fuse. If you continue to blow fuses, I recommend taking your mower to a Toro service dealership or a lawn mower repair shop to find the root cause of the electrical failure.

Still Having Problems with Your Toro Lawn Mower?

It would be great to own a problem-free lawn mower, but it’s never the case. No matter what brand mower you own, you’re going to run into problems the longer you own it.

To help you troubleshoot your Toro mower problems, I have put together a list of common problems along with causes and solutions to fixing them. Check out Common Toro Lawn Mower Problems and Solutions to learn more.